Aluminum Products

Prominent & Leading Supplier from Mumbai, we offer Aluminum Products such as Aluminium Sheets, Aluminium Alloy Pipe, Aluminium Coils, Aluminium Sheet 5052 O, Aluminium Plate 5052 O, Aluminium Sheets 5052 H111 and many more items.

Aluminium Sheets

The Sheets available in diffrent grades / width / length & specifications. They are also designed / cut as per the customer's specifications. These sheets are widely used in various types of industries also.







Aluminium Sheets

1100-H14 (QQ-A-250/1d) Commercially pure aluminum, highly resistant to chemical attack and weathering. Excellent for chemical processing equipment and other uses where product purity is important. Easily worked and welded, ductile enough for deep draws, but the lowest strength aluminum alloy. Uses include light reflectors, decorative and jewelry parts, name plates. Seldom used in precision sheet metal -- see 5052-H32.

3003-H14 (QQ-A-250/2c) General purpose manganese alloy. Stronger than 1100 with same good formability and low cost. Fine corrosion resistance and weldability. Used in stampings, spun and drawn parts, mail boxes, cabinets, tanks, fan blades. For higher strength, consider 5052-H32.

5052-H32 (QQ-A-250/8d) Main alloy is magnesium. Far stronger than any of the alloys described above, yet forms well with reasonable inside bend radii. Corrosion resistance and weldability is very good. Better salt water corrosion resistance than 1100. Used for electronic chassis, tanks, pressure vessels and any number of parts requiring considerable strength and formability at reasonable cost. Anodizing may be slightly yellowish.

6061-T6 (QQ-A-250/11d) Alloyed with magnesium & silicon. Heat treatable to improve strength. A widely used structural alloy for light to medium strength applications. Requires much larger inside bend radii than 5052-H32, but can be formed. Combines good weldability, corrosion resistance, and strength after heat treatment. Since it looses appreciable strength when welded, the 5000 series alloys replace it in dump body and some marine applications.

Quick comparison chart

Alloy Yield Formable Weldable Corrosion Color Code
1100-H14 17000 A A A+ WHITE
3003-H14 21000 B A A GREEN
5052-H32 28000 B A A PURPLE
6061-T6 40000 C A B+ BLUE

Minimum bend radius

When aluminum is bent around too small of an inside radius, cracking will occur. Cracking is most pronounced when the bend runs parallel to the natural grain of the material (formed as the sheet is rolled from molten ingot). It is generally a good idea to keep the inside radius at least equal to the material thickness. The more the merrier!.
Min bend radii for thickness (in 1/32nds of inch):

Alloy .032 .040 .050 .063 .090 .0125 .0190 .250
1100-H14 0 0 0 0 0 0 3 6
3003-H14 0 0 0 0 1 2 4 8
5052-H32 0 1 1 2 3 4 8 12
6061-T6 2 2 3 4 6 8 18 32






Aluminium Alloy Pipe

We are a reputed manufacturer, wholesaler and trader of a distinctive range of superior quality Alloy Pipe. Range of our product includes Copper Alloy Products. These are available in various shape, thickness and length as per the specifications of our customers. Our objective is to serve excellence to our clients.






Aluminium Sheets

We are reckoned as one of the most stupendous aluminum plain sheet manufacturers from India. The use of optimum quality materials in the manufacturing of the aluminum sheets ensures high durability, tensile strength and resistivity to various factors supporting rust. Moreover customers from every nook and corner of the worlds are placing huge and repeated orders for the aluminum metal sheets due to the inexplicable performance exhibited in respective applications. Customers are also eased with the availability of the aluminum metal sheets in varied sizes and dimensions.






Aluminium Coils

We procure high quality aluminum coils from reliable and certified vendors. They used fine grade raw material in fabrication of these products. Our assortment is widely used in various industrial applications. We offer our aluminum coils in different sizes as per specifications required by our clients








Aluminium Sheet 5052 O

Aluminium alloy 5052O is annealed material with good form ability. This alloy has good workability, very good corrosion resistance, high fatigue strength, weld ability and moderate strength. This leads to its use in aircraft fuel/oil lines, fuel tanks, other transportation areas, sheet metal work, appliances and lighting, wire, and rivets. Available in sheet plate and coil form, we can supply customize cut to length size as per the end customer requirement. We Supply sheets from 0.5 mm to 6mm in required width and length, standard width and length ready in stock 1250 mm X 2500 mm.






Aluminium Plate 5052 O

Aluminium plate 5052 O is annealed material with good formability. This alloy has good workability, very good corrosion resistance, high fatigue strength, weldability,and moderate strength. This leads to its use in aircraft fuel/oil lines, fuel tanks, other transportationareas, sheet metal work, appliances and lighting, wire, and rivets. Available in sheet plate and coil form, we can supply customize cut to length size as per the end customer requirement.We Supply sheets from 6 mm to 101mm in required width and length, Standard width and length ready in stock 1250 mm X 2500 mm.






Aluminium Sheets 5052 H111

5052 is one of the higher strength non-heat-treatable alloys. It has a high fatigue strength and is a good choice for structures subjected to excessive vibration. The alloy has excellent corrosion resistance, particularly in marine atmospheres. The formability of the grade is excellent and in the annealed condition it offers higher strengths than 1100 or 3003 grades. Temper available. O temper. H111, H112. Also available in sheet form, we can supply customize cut to length size as per the end customer requirement. We supply sheets from 0. 5 mm to 6mm in required width and length, standard width and length ready in stock 1250 mm x 2500 mm.






Aluminium Plates 5052 H111

5052 is one of the higher strength non-heat-treatable alloys. It has a high fatigue strength and is a good choice for structures subjected to excessive vibration. The alloy has excellent corrosion resistance, particularly in marine atmospheres. The formability of the grade is excellent and in the annealed condition it offers higher strengths than 1100 or 3003 grades. Temper avaiable. O temper. H111, H112. We supply sheets from 6mm to 101 mm in required width and length, Standard width and length ready in stock 1250mm X 2500mm.






Alloy Steel Round Bars

F 11 round bar
F 22 round bar
F 91 round bar
F 5 round bar
F 9 round bar










Aluminium Products

Our clients can avail from us Aluminum Products, which are supplied in various forms such as round hexagonal, squares, rods, tubes, sheets, strips, foils, busbars, plate, flats, wire, tubing, sections & bushes. Aluminum products offered by us include aluminum, aluminum bronze, aluminum silicon bronze, manganese bronze, phosphorous bronze and gunmetal. Owing to our widespread distribution network, we have successfully processed orders within agreed deadlines.






Aluminium Hot Rolled Plates

We offer a wide range of aluminum hot rolled plates to our clients in specified shapes and sizes which is made up of qualitative aluminum. These are very durable and rust proof and are offered at industry leading prices to our clients The plates are also available in different grades and are as follows:

  • 6200
  • 6082
  • 6063
  • 2014
  • 2024
  • 7075 etc.







Aluminium Chequered Plates

The aluminium chequered sheets we supply have high ductility and can be easily molded to transform the sheet metal into different shapes to be used for a large variety of finished parts. The sheets we supply find its application in various industry segments that include food processing for making cans, automobiles for making body panels and for several purposes in construction, building etc.